Signgeer

Build Your Own - Sign Panel with Taped Channel

Product code: PROD-BYO

A totally customisable kit. The Build-Your-Own Sign Panel with Channel section contains everything you need to make your own sign panels with channel fixed to the rear using specialist tape. Simply select the components you need and the... Read more

A totally customisable kit. The Build-Your-Own Sign Panel with Channel section contains everything you need to make your own sign panels with channel fixed to the rear using specialist tape.

Simply select the components you need and the quantity of each and you'll be good to go.

Assembly instructions, along with hints and tips can be found below :)

Read less

Select Products

Small Sign Channel 2.5m - White Product Code: ALURAILSW

£13.20 £11.00

Midi Sign Channel 2.5m - Grey Product Code: ALURAILMIDG

£11.46 £9.55

EPIC TRACK | Sign Channel Foam Tape Grey- 19mm x 33m Product Code: CTAPE19

£27.90 £23.25

3 for £26.51 £22.09 each

Medium Sign Channel 2.5m - Grey Product Code: ALURAIL

£13.08 £10.90

Medium Sign Channel 2.5m - White Product Code: ALURAILW

£15.90 £13.25

EPIC TRACK | Sign Channel Foam Tape Grey - 24mm x 10m (Mini Roll) Product Code: MINICTAPE

£15.54 £12.95

EPIC TRACK | Sign Channel Foam Tape Grey - 24mm x 33mm Product Code: CTAPE

£35.94 £29.95

3 for £34.14 £28.45 each

50mm Roller - Medium Hard Product Code: ROLLER50

£9.54 £7.95

Surfacework Isopropyl Alcohol - 1L Spray Product Code: ISOP

£10.20 £8.50

Signgeer Isopropyl - Easy Application Pen Product Code: PENISOP

£2.34 £1.95

3M™ Primer 94 - 236ml Product Code: PRIMER94

£20.82 £17.35

Easy Application Pen Set - Isopropyl Cleaner & 3M Primer 94 Product Code: PENSET2

£7.14 £5.95

Signgeer Swabs (Pack of 20) Product Code: SWABS20

£10.08 £8.40

Small Sign Channel 2.5m - Grey Product Code: ALURAILS

£10.50 £8.75

Subtotal (0)

£0.00 ex. VAT

£0.00 inc. VAT

Description

APPLYING SIGN CHANNEL FOAM TAPE

The general guidance temperature for applying tape is approx. +15⁰C - +30⁰C

1. Clean

Clean and degrease the surfaces with 100% isopropyl alcohol. The surfaces must be clean, dry and free of moisture, condensation, grease, dust and any other contaminants.

2. Prime

Prime the surface using a suitable primer, following the manufacturer's instructions.

3. Apply

Whilst handling the tape, ensure that the adhesive surface of the tape is not touched as this could cause cross-contamination and transfer of oils from the skin to the adhesive.

Apply the tape to the surface using a squeegee or preferably a roller to ensure a good, even pressure. This is key to ensure full adhesion of the tape to the surface.

We recommend leaving the finished product at least 24 hours prior to fitting to ensure the best adhesion of the tape to the product surface.

Ask a question

Product Reviews